*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 28 Dec 2003   14:26:09   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 28 Dec 2003   14:26:44   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031228 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 227.66 stddev =   7.67
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_031228 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1517.7    1517.7    1198.7      0.12      0.10      1.27
        2      8.00    3030.7    3033.1    2325.7     -0.12     -0.05      1.30
        3     16.00    6061.3    6061.7    4574.7     -0.17     -0.17      1.32
        4     24.00    9095.5    9095.4    6958.3     -0.14     -0.15      1.31
        5     36.00   13650.1   13650.0   10382.2     -0.10     -0.11      1.31
        6     48.00   18209.3   18208.7   13883.2     -0.05     -0.06      1.31
        7     60.00   22772.8   22772.7   17169.5     -0.01     -0.01      1.33
        8     80.00   30390.5   30389.7   22900.5      0.08      0.07      1.33
        9    100.00   38018.7   38016.6   28961.9      0.15      0.15      1.31
       10    120.00   45657.7   45657.1   34594.5      0.23      0.23      1.32
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2004 to 60288 e-
      Average count rate measured: 380 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.32 +/-   0.00 e-/ADU
 
      RON    =  10.13 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.004 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.23/-0.17 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay