*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 22 Dec 2003   17:53:40   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 22 Dec 2003   17:54:15   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031222 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 226.98 stddev =   7.73
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_031222 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1512.2    1512.0    1192.4      0.12      0.11      1.27
        2      8.00    3019.3    3019.9    2329.7     -0.10     -0.09      1.30
        3     16.00    6035.9    6037.1    4622.0     -0.18     -0.16      1.31
        4     24.00    9057.2    9057.7    6840.5     -0.15     -0.15      1.32
        5     36.00   13592.6   13593.1   11237.0     -0.11     -0.11      1.21
        6     48.00   18133.2   18134.3   13781.9     -0.06     -0.05      1.32
        7     60.00   22680.4   22678.4   17776.8      0.00     -0.01      1.28
        8     80.00   30262.6   30263.3   22483.7      0.07      0.07      1.35
        9    100.00   37863.2   37860.9   28605.7      0.16      0.15      1.32
       10    120.00   45466.3   45465.0   34035.5      0.23      0.22      1.34
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2024 to 60872 e-
      Average count rate measured: 378 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.34 +/-   0.02 e-/ADU
 
      RON    =  10.34 +/-   0.12 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.002 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.23/-0.17 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay