*** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 09 Dec 2003   11:54:56   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 09 Dec 2003   11:55:31   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031209 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 223.52 stddev =   7.74
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_031209 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1517.9    1518.8    1192.9      0.11      0.10      1.27
        2      8.00    3030.4    3031.0    2340.7     -0.10     -0.11      1.29
        3     16.00    6058.2    6059.7    4660.7     -0.16     -0.15      1.30
        4     24.00    9089.1    9089.9    6965.4     -0.15     -0.15      1.30
        5     36.00   13638.8   13639.4   10498.1     -0.12     -0.11      1.30
        6     48.00   18196.5   18196.0   13701.0     -0.06     -0.06      1.33
        7     60.00   22756.7   22756.1   17061.1     -0.01     -0.01      1.33
        8     80.00   30368.9   30367.8   22734.6      0.08      0.08      1.34
        9    100.00   37994.0   37990.6   28370.7      0.16      0.16      1.34
       10    120.00   45626.1   45621.7   34256.4      0.24      0.23      1.33
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2035 to 61155 e-
      Average count rate measured: 379 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.34 +/-   0.00 e-/ADU
 
      RON    =  10.38 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.001 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.24/-0.16 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay