*** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 02 Dec 2003   18:29:30   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Tu, 02 Dec 2003   18:29:58   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031202 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 219.88 stddev =   7.65
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_031202 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1529.0    1528.9    1207.1      0.12      0.11      1.27
        2      8.00    3050.9    3051.3    2366.2     -0.08     -0.07      1.29
        3     16.00    6095.3    6096.0    4722.1     -0.18     -0.17      1.29
        4     24.00    9146.2    9146.5    6939.5     -0.14     -0.14      1.32
        5     36.00   13722.6   13722.9   10381.2     -0.11     -0.11      1.32
        6     48.00   18305.7   18306.7   13940.0     -0.06     -0.06      1.31
        7     60.00   22893.4   22892.8   17535.5     -0.01     -0.02      1.31
        8     80.00   30551.2   30549.3   23262.2      0.08      0.07      1.31
        9    100.00   38217.6   38219.7   29071.1      0.15      0.16      1.31
       10    120.00   45893.8   45895.6   34563.2      0.23      0.23      1.33
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2024 to 60745 e-
      Average count rate measured: 382 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.32 +/-   0.00 e-/ADU
 
      RON    =  10.13 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.005 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.23/-0.17 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay