*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 23 Nov 2003   14:06:48   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Su, 23 Nov 2003   14:07:21   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031123 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 224.71 stddev =   7.66
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_031123 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1535.2    1535.3    1211.0      0.12      0.13      1.27
        2      8.00    3064.2    3064.4    2370.7     -0.12     -0.11      1.29
        3     16.00    6126.9    6127.1    4668.8     -0.16     -0.16      1.31
        4     24.00    9191.7    9191.8    6981.8     -0.15     -0.15      1.32
        5     36.00   13794.6   13795.1   10509.2     -0.11     -0.10      1.31
        6     48.00   18403.0   18402.6   13982.0     -0.05     -0.06      1.32
        7     60.00   23015.3   23014.8   17227.8     -0.00     -0.01      1.34
        8     80.00   30711.7   30713.3   23187.3      0.08      0.08      1.32
        9    100.00   38425.7   38422.1   28816.1      0.17      0.16      1.33
       10    120.00   46142.7   46141.8   34004.9      0.24      0.23      1.36
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2073 to 62296 e-
      Average count rate measured: 384 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.35 +/-   0.01 e-/ADU
 
      RON    =  10.34 +/-   0.06 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate = -0.000 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.24/-0.16 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay