*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 27 Oct 2003   18:38:58   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Mo, 27 Oct 2003   18:39:28   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031027 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 222.50 stddev =   7.67
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_031027 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1553.4    1556.6    1244.8      0.10      0.10      1.25
        2      8.00    3102.3    3103.5    2394.3     -0.07     -0.10      1.30
        3     16.00    6197.9    6199.5    4755.9     -0.16     -0.16      1.30
        4     24.00    9298.7    9298.8    7108.1     -0.14     -0.15      1.31
        5     36.00   13952.7   13952.3   10698.2     -0.11     -0.11      1.30
        6     48.00   18611.0   18611.5   14076.6     -0.07     -0.06      1.32
        7     60.00   23274.9   23273.9   17330.8     -0.02     -0.01      1.34
        8     80.00   31060.5   31060.2   23479.7      0.07      0.08      1.32
        9    100.00   38859.8   38859.6   28888.4      0.16      0.17      1.35
       10    120.00   46662.9   46662.4   35228.2      0.23      0.24      1.32
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2078 to 62353 e-
      Average count rate measured: 388 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.34 +/-   0.01 e-/ADU
 
      RON    =  10.25 +/-   0.05 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.005 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.23/-0.16 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay