*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 10 Oct 2003   13:46:16   Page 1
 
 
*** MIDAS logfile (vers. 02SEPpl1.3) *** Fr, 10 Oct 2003   13:46:48   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 031010 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 220.57 stddev =   7.70
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_031010 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1558.3    1558.5    1246.7      0.10      0.10      1.25
        2      8.00    3107.7    3108.4    2396.6     -0.08     -0.08      1.30
        3     16.00    6208.1    6208.7    4802.4     -0.15     -0.15      1.29
        4     24.00    9312.0    9310.6    7186.4     -0.14     -0.15      1.30
        5     36.00   13969.5   13971.6   10592.8     -0.12     -0.10      1.32
        6     48.00   18635.4   18634.8   14190.6     -0.06     -0.06      1.31
        7     60.00   23305.0   23302.5   17688.9     -0.01     -0.02      1.32
        8     80.00   31097.1   31096.8   23459.7      0.07      0.07      1.33
        9    100.00   38905.3   38905.7   29302.0      0.16      0.16      1.33
       10    120.00   46719.2   46718.6   34944.7      0.23      0.23      1.34
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2084 to 62478 e-
      Average count rate measured: 388 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.34 +/-   0.00 e-/ADU
 
      RON    =  10.30 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.009 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.23/-0.15 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay