*** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 23 Sep 2003   18:43:13   Page 1
 
 
*** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 23 Sep 2003   18:43:47   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 030923 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 218.42 stddev =   7.68
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_030923 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1559.7    1559.9    1223.4      0.10      0.10      1.27
        2      8.00    3110.8    3110.8    2436.1     -0.08     -0.08      1.28
        3     16.00    6212.2    6214.8    4772.7     -0.18     -0.14      1.30
        4     24.00    9320.6    9320.3    7094.8     -0.14     -0.14      1.31
        5     36.00   13982.5   13982.8   10660.8     -0.12     -0.11      1.31
        6     48.00   18653.0   18650.3   14161.4     -0.06     -0.07      1.32
        7     60.00   23327.5   23325.4   17885.4     -0.00     -0.01      1.30
        8     80.00   31126.9   31126.0   23147.4      0.08      0.07      1.34
        9    100.00   38941.4   38939.6   29232.3      0.16      0.16      1.33
       10    120.00   46761.5   46761.1   35130.4      0.23      0.23      1.33
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2086 to 62532 e-
      Average count rate measured: 389 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.34 +/-   0.01 e-/ADU
 
      RON    =  10.27 +/-   0.04 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.009 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.23/-0.16 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay