*** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 16 Sep 2003   15:18:53   Page 1
 
 
*** MIDAS logfile (vers. 02FEBpl1.0) *** Tu, 16 Sep 2003   15:19:22   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 030916 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 225.26 stddev =   7.70
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_030916 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1590.7    1590.8    1244.5      0.14      0.12      1.28
        2      8.00    3170.5    3172.2    2423.3     -0.16     -0.12      1.31
        3     16.00    6338.7    6338.9    4863.7     -0.17     -0.17      1.30
        4     24.00    9509.4    9508.7    7255.8     -0.15     -0.16      1.31
        5     36.00   14269.3   14270.2   10915.2     -0.11     -0.11      1.31
        6     48.00   19035.1   19034.4   14524.3     -0.06     -0.06      1.31
        7     60.00   23806.9   23807.3   18376.5     -0.00      0.00      1.30
        8     80.00   31768.8   31765.4   24058.5      0.08      0.07      1.32
        9    100.00   39747.9   39746.6   29831.0      0.18      0.18      1.33
       10    120.00   47729.3   47725.4   35543.8      0.25      0.24      1.34
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2130 to 63915 e-
      Average count rate measured: 397 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.34 +/-   0.01 e-/ADU
 
      RON    =  10.31 +/-   0.06 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.005 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.24/-0.17 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay