*** MIDAS logfile (vers. 02FEBpl1.0) *** Th, 21 Aug 2003   17:55:27   Page 1
 
 
*** MIDAS logfile (vers. 02FEBpl1.0) *** Th, 21 Aug 2003   17:56:13   Page 2
 
     ==========================================================
     SUMMARY STANDARD TEST CCD#40 TAKEN ON 030821 IN 10 MODE
     ==========================================================
 
      BIAS
      ====
 
      5 biases at start test: average = 222.05 stddev =   7.79
 
      There were 0 hot pixels/columns detected
 
 
      TRANSFER FUNCTION AND LINEARITY DATA
      ====================================
 
  Table : Std_10_40_030821 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      4.00    1568.9    1568.9    1243.7      0.12      0.11      1.26
        2      8.00    3129.5    3129.7    2407.0     -0.10     -0.11      1.30
        3     16.00    6253.2    6254.1    4790.7     -0.17     -0.16      1.31
        4     24.00    9383.2    9382.5    7112.5     -0.13     -0.14      1.32
        5     36.00   14075.9   14076.2   10692.0     -0.12     -0.12      1.32
        6     48.00   18778.3   18777.5   14113.9     -0.06     -0.06      1.33
        7     60.00   23486.0   23484.2   17866.1     -0.01     -0.01      1.31
        8     80.00   31340.9   31340.5   23538.9      0.08      0.08      1.33
        9    100.00   39209.7   39208.7   29460.8      0.17      0.17      1.33
       10    120.00   47085.9   47086.9   35216.0      0.24      0.24      1.34
 -------- --------- --------- --------- --------- --------- --------- ---------
 
      Dynamic range explored: from 2099 to 62982 e-
      Average count rate measured: 391 ADU/sec.
 
      CONV. FACTOR AND RON
      ====================
 
      C.Fact =   1.34 +/-   0.00 e-/ADU
 
      RON    =  10.42 +/-   0.03 e- RMS
 
 
      SHUTTER ERROR
      =============
 
 Average shutter error derived from fractional count rate =  0.006 sec
 
 
      LINEARITY ERROR
      ===============
 
 Average linearity error after shutter correct. = + 0.24/-0.17 %
 
 These errors represent maximum deviation in % from the average
 count rate after correction for shutter delay