***  MIDAS logfile (vers. 95NOV) *** Th, 30 Sep 1999   13:18:44   Page 1
 
 
  ***  MIDAS logfile (vers. 95NOV) *** Th, 30 Sep 1999   13:20:09   Page 2
 
     =========================================================
= 
     SUMMARY STANDARD TEST CCD#01 TAKEN ON 990930 IN fast MODE
 
     =========================================================
= 
  
      BIAS 
      ==== 
  
      5 biases at start test: average = 1210.99  stddev =   6.
92  
  
      There were 0 hot pixels/columns detected 
  
  
      TRANSFER FUNCTION AND LINEARITY DATA 
      ==================================== 
  
  Table : Std_fast_01_990930 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1 
 -------- --------- --------- --------- --------- ---------
        1      1.00    1291.0    1292.4     994.3      0.00
        2      2.00    2573.2    2574.9    1941.4     -0.04
        3      3.00    3855.6    3855.2    2871.9     -0.05
        4      6.00    7705.2    7703.3    5676.6     -0.03
        5      9.00   11551.4   11552.5    8468.9     -0.05
        6     12.00   15401.5   15400.9   11202.8     -0.03
        7     17.00   21819.7   21820.1   15680.3     -0.01
        8     27.00   34662.1   34662.2   25077.9      0.02
        9     37.00   47523.7   47520.7   33895.6      0.08
       10     44.00   56531.6   56528.0   39820.4      0.11
 -------- --------- --------- --------- --------- ---------
 Sequence Frc_cnt2  el_adu1  
 -------- --------- ---------
        1      0.03      1.30
        2     -0.01      1.33
        3     -0.08      1.34
        4     -0.06      1.36
        5     -0.04      1.36
        6     -0.04      1.37
        7     -0.01      1.39
        8      0.02      1.38
        9      0.08      1.40
       10      0.11      1.42
 -------- --------- ---------
  
      Dynamic range explored: from 1828 to 80015 e- 
      Average count rate measured: 1283 ADU/sec. 
  
      CONV. FACTOR AND RON 
      ==================== 
  
      C.Fact =   1.42  +/-   0.01  e-/ADU 
  
      RON    =   9.79  +/-   0.05  e- RMS 
  
  
 
  ***  MIDAS logfile (vers. 95NOV) *** Th, 30 Sep 1999   13:20:09   Page 3
 
      SHUTTER ERROR 
      ============= 
  
 Average shutter error derived from fractional count rate =  0
.006  sec 
  
  
      LINEARITY ERROR 
      =============== 
  
 Average linearity error after shutter correct. = + 0.11 /-0.0
6  % 
  
 These errors represent maximum deviation in % from the averag
e 
 count rate after correction for shutter delay