***  MIDAS logfile (vers. 95NOV) *** Sa, 06 May 2000   16:32:07   Page 1
 
 
  ***  MIDAS logfile (vers. 95NOV) *** Sa, 06 May 2000   16:33:08   Page 2
 
     ========================================================== 
     SUMMARY STANDARD TEST CCD#01 TAKEN ON 000506 IN fast MODE 
     ========================================================== 
  
      BIAS 
      ==== 
  
      5 biases at start test: average = 1221.22  stddev =   5.95  
  
      There were 0 hot pixels/columns detected 
  
  
      TRANSFER FUNCTION AND LINEARITY DATA 
      ==================================== 
  
  Table : Std_fast_01_000506 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      1.00    1225.9    1226.2    1031.8      0.04      0.06      1.19
        2      2.00    2443.9    2445.0    1932.6     -0.03      0.01      1.26
        3      3.00    3663.1    3662.0    2825.9     -0.03     -0.05      1.30
        4      6.00    7320.4    7318.3    5430.2     -0.02     -0.05      1.35
        5      9.00   10974.2   10974.9    8071.0     -0.05     -0.05      1.36
        6     12.00   14631.9   14632.9   10884.1     -0.04     -0.03      1.34
        7     17.00   20727.8   20727.1   15214.6     -0.03     -0.04      1.36
        8     27.00   32932.0   32930.6   23692.2      0.01      0.01      1.39
        9     37.00   45147.2   45146.9   32315.1      0.06      0.06      1.40
       10     44.00   53701.2   53702.0   38105.1      0.08      0.09      1.41
 -------- --------- --------- --------- --------- --------- --------- ---------
  
      Dynamic range explored: from 1732 to 75849 e- 
      Average count rate measured: 1219 ADU/sec. 
  
      CONV. FACTOR AND RON 
      ==================== 
  
      C.Fact =   1.41  +/-   0.01  e-/ADU 
  
      RON    =   8.40  +/-   0.03  e- RMS 
  
  
      SHUTTER ERROR 
      ============= 
  
 Average shutter error derived from fractional count rate =  0.005  sec 
  
  
      LINEARITY ERROR 
      =============== 
  
 Average linearity error after shutter correct. = + 0.09 /-0.05  % 
  
 These errors represent maximum deviation in % from the average 
 count rate after correction for shutter delay