***  MIDAS logfile (vers. 95NOV) *** We, 05 Jan 2000   17:56:21   Page 1
 
 
  ***  MIDAS logfile (vers. 95NOV) *** We, 05 Jan 2000   17:57:44   Page 2
 
     ========================================================== 
     SUMMARY STANDARD TEST CCD#01 TAKEN ON 200105 IN fast MODE 
     ========================================================== 
  
      BIAS 
      ==== 
  
      5 biases at start test: average = 1201.56  stddev =   6.89  
  
      There were 0 hot pixels/columns detected 
  
  
      TRANSFER FUNCTION AND LINEARITY DATA 
      ==================================== 
  
  Table : Std_fast_01_200105 
 Sequence Exp_tim1  Med_cnt1  Med_cnt2  Variance  Frc_cnt1  Frc_cnt2  el_adu1  
 -------- --------- --------- --------- --------- --------- --------- ---------
        1      1.00    1256.9    1257.2     969.4      0.06      0.09      1.30
        2      2.00    2506.7    2506.1    1889.8      0.04      0.01      1.33
        3      3.00    3751.9    3751.4    2817.5     -0.10     -0.12      1.33
        4      6.00    7496.9    7498.8    5570.6     -0.11     -0.09      1.35
        5      9.00   11251.6   11252.5    8290.6     -0.03     -0.02      1.36
        6     12.00   15001.0   15002.1   10971.0     -0.02     -0.02      1.37
        7     17.00   21247.9   21247.6   15300.5     -0.02     -0.03      1.39
        8     27.00   33754.4   33755.1   24097.4      0.01      0.01      1.40
        9     37.00   46282.0   46279.3   32600.6      0.07      0.06      1.42
       10     44.00   55051.5   55050.2   38996.5      0.10      0.09      1.41
 -------- --------- --------- --------- --------- --------- --------- ---------
  
      Dynamic range explored: from 1786 to 78232 e- 
      Average count rate measured: 1250 ADU/sec. 
  
      CONV. FACTOR AND RON 
      ==================== 
  
      C.Fact =   1.42  +/-   0.00  e-/ADU 
  
      RON    =   9.79  +/-   0.03  e- RMS 
  
  
      SHUTTER ERROR 
      ============= 
  
 Average shutter error derived from fractional count rate =  0.005  sec 
  
  
      LINEARITY ERROR 
      =============== 
  
 Average linearity error after shutter correct. = + 0.10 /-0.11  % 
  
 These errors represent maximum deviation in % from the average 
 count rate after correction for shutter delay