README web version of /home/usg/OPS/MTS/readme_xml/readme_84056900
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
This observation programme consists of narrow-band imaging of the Galactic
compact HII region IRAS 12063-6259. Six filters will be used: NB 1.21, NB 1.28,
NB 2.17, and NB 2.19 on the SW Hawaii arm; NB 3.21 and NB 3.28 on the LWI4 Aladdin
arm. After each science observing block, the standard star Hip 64770 (13:16:26.2603,
-63:58:25.567; spectral type F2 V) is observed immediately following, in the corresponding
narrow-band filter. All SW observations are executed using predefined offsets to
obtain sky images, while all LWI4 observations are in chopping mode with a chop
throw of 15 or 20 arcseconds and chop position angle of 0 degrees. While the field
of view for the NB 1.21, NB 1.28, NB 3.21, and NB 3.28 observationss are centered
at 12:09:01.120, -63:15:54.70, the field of view for the NB 2.17 and NB 2.19 filters
are centered at 12:09:01.120, -63:15:38.90 in order to avoid a bright source saturating
the detector.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you submitted OBs for standard stars, did you use the provided StandardStar
templates ?
If you are using a specific offset pattern or position angle, did you
check carefully the definition in the manual ?
If you are doing spectroscopy, did you draw the slit on the Finding Charts
?
Did you enter the magnitude of the brightest star in the field-of-view
in the 'Instrument Comments' field of each OB ?
If you use the MoveToPixel acquisition, have you given clear instructions
on the FC and in the OB comment section as to how the field should be centered ?
Last creation of page: Tue Oct 6 15:40:32 2009
If you have comments, please contact usd-help@eso.org