README web version of /home/usg/OPS/MTS/readme_xml/readme_84036604
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
These VISIR images are to support our MIDI observations, which are scheduled
in visitor mode on 28 Feb - 3 Mar 2010. Goals are (1) to obtain accurate photometry
at 8.5 and 12 um to back-up (rather inaccurate) photometry with MIDI (to better
calibrate MIDI visibility); (2) to check if there is any extended emission in the
mid-IR for each target, by comparing the image with a PSF star image. Thus, we request
to observe a PSF star right after the target.
Depending on the conditions in our MIDI run, we might have to switch to back-up
targets, in which case the targets of these VISIR observations would have to be
changed. Therefore, please execute these VISIR observations ONLY AFTER 2 Mar 2010.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
These images are to support our MIDI observations which are scheduled
in visitor mode on 28 Feb - 2 Mar 2010. Depending on the conditions in this scheduled
run, we might have to switch to back-up targets, in which case the targets of the
VISIR observations would have to be changed. Therefore, please execute these VISIR
observations ONLY AFTER 2 Mar 2010.
Special Execution Requirements
Please execute each PSF/flux calibration star right after each target
observation, namely:
please execute CAL_PSF_H0557_VISIR084 right after H0557_VISIR084;
please execute CAL_PSF_IRAS09149_VISIR084 right after IRAS09149_VISIR084;
please execute CAL_PSF_IRAS13349_VISIR084 right after IRAS13349_VISIR084.
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If the provided finding chart is at a different wavelength than the observations,
did you clearly describe in the README file how to identify the target?
Did you specify a guide star brighter than V=12mag within a field of
r=5arcmin around the science target?
Last creation of page: Tue Oct 6 15:40:31 2009
If you have comments, please contact usd-help@eso.org