README web version of /home/usg/OPS/MTS/readme_xml/readme_83094001
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
Spectroscopic redshifts of B-R, R-I colour selected galaxies
that have a limiting magnitude R>25
are to be determined using VIMOS MOS. These are in the
surrounding field-of-view of the central HDF quasar J2233-6033.
2 masks have been designed for two pointings with OBs that
will use the LR-red grism.
The first pointing has the quasar in the centre of
the field-of-view and will be exposed for 13 sub-eposures
each lasting 1700 seconds. This is to be achieved by
4 sets of 2 hour OBs that comprise of 3 sub-exposures
for each set of calibration overheads, the necessary waiver
has been granted.
A jitter of +/- 1" along the slit is to be done between each of the 3 sub-exposures
to aid in the sky subtraction. The sequence of off-sets is
1. on target
2. -1" along the slit.
3. +2" along the slit.
There will then be a final 1-hour OB comprising of 1 1700 s
exposure with overheads. These OBs all have the prefix
MOS_J2233_P1.
The exact same procedure is then carried out for the
second pointing that has an off-set 3' x 3' from
the central quasar. These OBs have the prefix
MOS_J2233_P2.
This program is the 3rd in three that have targetted galaxies
in the foreground of quasars in order to correlate the
galaxy positions with lya absorbers in the quasar absorption
spectra.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
Did you specify suitable guide stars for all your OBs using Guidecam
?
Did you check that the chosen guide stars are suitable for all the offset
positions and that they do not produce unacceptable vignetting of the field of view
?
Last creation of page: Tue Oct 6 15:40:31 2009
If you have comments, please contact usd-help@eso.org