README web version of /home/usg/OPS/MTS/readme_xml/readme_83073308
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
Observe as soon as possible. HIGHEST PRIORITY!!, visitor compensation
for 3.7h time lost due to ToO/RRM.
!!THIS README is written by the daytime support astronomer on UT2 [Steffen Mieske],
using the info provided by the visitors which have left Paranal.!!
NOTE: the total amount of time awarded to the compensation is 3.7 hours, but subdivided
in two Runs I (1.7h) and J (2h). We put all three OBs of duration 1:14 into run
I and none for run J because it was not possible to split the user provided OBs
to fit the individual times of each run. OPO should change the time allowance correspondingly.
Run I should have 3.7 hours, Run J can be cancelled.
User description as follows:
The project wants to probe the fine structure and proton-to-electron mass ratio
trough observations of absorption lines in QSOs
Three identical OBs with attached ThAr, 1h15min each
If possible execute all OBs in a row. If so, skip aquisition
when changing OB. Coordinates are good, object is brightest
object in the field, no find chart needed.
Waiver Requests
Critical Observing Condition Constraints
Weather constraints according to proposal:
==============
Seeing: 0.8\"
CLR
Moon: new
Weather conditions during ToO triggers, i.e. during the time lost:
======================================
CLR and seeing 0.5-1.2 (on guide star), Moon new
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you specified the S/N ratio at given wavelength in the User Comments
field of each OB?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you need secondary guiding, are there suitable objects within 30 arcsec
from your target ?
Last creation of page: Tue Oct 6 15:40:30 2009
If you have comments, please contact usd-help@eso.org