README web version of /home/usg/OPS/MTS/readme_xml/readme_82501700
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
Simple LSS spectrsocopy with FORS1 and GRIS 600V.
The target, a so called andi-dwarf nova, is in a low state, i.e. it is much fainter
than it appears in the attached finding charts.
The currently expected V mag is about 18-18.5 (while during normal/bright state
it is at V=12.9 mag).
The target is in the center of the FCs (i.e. ignore the red cross in the 'Aladin
created FC').
The program consists in time resolved spectroscopy: i.e. 21 exposures (each lasting
10 min), should be taken during 4 consecutive hrs.
I have created 3 identical OBs but only the acquistion of the first OB should be
executed.
Please execute OB N.2 and N.3 skipping both the acquisition and the through slit.
PLEASE RESET THE ADC BEFORE STARTING OB N.2 AND OB N.3 (this is the reason why I
created 3 OBs in place of a single one).
Waiver Requests
Critical Observing Condition Constraints
In the proposal I have asked for clear sky, seeing of about 1 and grey
time.
Of course, given that the target is setting and the proposal evaluation/approval
took its time, I accept reasonable overriding of the requested conditions, as it
is important to have the data.
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS1 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:28 2009
If you have comments, please contact usd-help@eso.org