README web version of /home/usg/OPS/MTS/readme_xml/readme_82076200
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
This is a program aimed at investigating the escaping fraction of ionizing
radiation from galaxies at z ~3 in GOODS-South.
The 23 submitted OBs are essentially 2 masks, with mostly the same targets but rotated
180 deg each other: mask MOS_GOODS_1 OBs are 12 times the same OB (1 hr long). mask
MOS_GOODS_2 OBs are 11 the same OB (1 hr long). The OBs can be executed in any order.
We selected 7 reference stars for the first mask and 9 reference stars for the second
mask which should give a good S/N for centering in the 45 seconds of acquisition
step (the ETC has been used with 1".0 seeing). We didn't use any preimaging: the
previous very succesfull runs of GOODS-FORS2 have shown that mask design using ACS
mosaic results in very reliable masks.
SLIT CENTERING!
Mask 1 (MOS_GOODS_1)
4 slits (#19, #15, #4, #1) have been placed on point like objects and should be
centered in their slits after the through slit step. The sources which are the targets
of these observations are relatively faint and thus could not be visible in their
slits after the through slit step.
Mask 2 (MOS_GOODS_2)
3 slits (#1,#5, #19) contain point like objects which are expected to be centered
in their slits after the through slit step.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS1 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:27 2009
If you have comments, please contact usd-help@eso.org