README web version of /home/usg/OPS/MTS/readme_xml/readme_82073200

Principal Investigator Email Address

```
shoenig@mpifr-bonn.mpg.de
```

Estimated Total Execution Time (hours, including overheads)

```
8.2
```

General Description

+ The program aims for observing 3 bright AGN in the Q-band: Imagining
 with the Q1 and Q3 filter, and MR spectroscopy at the 24.36 and 27.50 micron windows
 which were not open to the public yet. 

+ Please make sure that the correct central wavelength is set in BOB since 24.36
 and 27.50 is non-standard

+ For the spectroscopy part, a calibrator exists for each object and PA orientation.
 Please execute this OB before or after the corresponding science OB.

Waiver Requests

+ Waiver: Use of non-standard Q-band MR spectroscopy settings at 24.36
 micron and 27.40 micron

The waiver was approved 06/07/2008.

Critical Observing Condition Constraints

+ Q-band observations are very sensitive to the amount of precipitable
 water vapor (pwv). Please execute these OBs only if pwv is below 1-2mm.

Time-Critical Aspects

```
n/a
```

Special Execution Requirements

+ For the spectroscopic observations in the 24.36 and 27.40 micron windows,
 please execute the corresponding calibrator before or after the science target.
 Which calibrator belongs to which target can be identified by the OB names

Science target OB name scheme: SCI_SPC_[Name of object]_MR_[running number]
Calibrator OB name scheme:     CAL_SPC_[Name of target]_[Name of calibrator]_MR_[running
 number]

Science-calibrator pairs:
Circinus -- HD123139
NGC1068 -- HD25025
NGC7469 -- HD216032

Special Calibration Information

```
see special execution requirement
```

ToO Information

```
n/a
```

ToO Activators List

```
n/a
```

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

```
n/a
```

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

---(Empty)---

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

```
N/A
```

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

If the provided finding chart is at a different wavelength than the observations, did you clearly describe in the README file how to identify the target?

Did you specify a guide star brighter than V=12mag within a field of r=5arcmin around the science target?

Last creation of page: Tue Oct 6 15:40:27 2009
If you have comments, please contact usd-help@eso.org