README web version of /home/usg/OPS/MTS/readme_xml/readme_82049101

Principal Investigator Email Address

• pascucci@as.arizona.edu

Estimated Total Execution Time (hours, including overheads)

• 04:59:58

General Description

• There are 3 target OBs (TWHya, J0843.3-0, and J0843.3-1) for the 2 target
   stars TWHya and J0843.3. There are 4 calibration OBs (1 telluric and 1 photometric
   standard for each target).
  I would like if the OBs J0843.3-0 and J0843.3-1 would be executed one after the
   other with in between the photometric and the telluric standard for the source (I
   was granted a waiver from ESO for observing this sequence). I used the User Priority
   field in the OBs to indicate this OB sequence: J0843.3-0, CAL_tell4J0843_EtaCha,
   CAL_phot4J0843_RECX12, J0843.3-1.
  For the source TWhya I would prefer if the telluric standard would be observed before
   the source while the photometric standard after the source (see the User Priority
   field, OB sequence: CAL_tell4TWHya_HD92845, TWHya, CAL_phot4TWHya_HD98800).
  For each telluric/photometric and target OB I have included the source K(2mass)
   magnitude and the expected S/N from the Crires/ETC. Please let me know if you need
   any other info, thank you.

Waiver Requests

• I submitted 2 waiver requests and were both granted. One waiver was to
   observe 3 OBs each for 1h 11min (rather than the maximum of 1h 05m). The other waiver
   was to observe a sequence of OBs as indicate in the General Description of the Readme
   file.

Critical Observing Condition Constraints

• None

Time-Critical Aspects

• None

Special Execution Requirements

• Sequence of 4 OBs as indicated in the General Description of the Readme
   file.

Special Calibration Information

• Calibrators (telluric and photometric) are included as 4 separate OBs.

ToO Information

• ---(Empty)---

ToO Activators List

• ---(Empty)---

Do the README file and the instrument comments of the telluric stars
 OBs include the required S/N/pixel of the spectrum of the telluric star, its spectral
 type and allowed spectral range?

• YES

Do any OBs include wavelength or flatfield calibrations?

• NO

If you are observing Moving Targets, have you attached suitable ephemeris
 files to your OBs?

• N/A

If the slit viewer guide star is different from the target, are the RA
 and DEC offsets accurate to within 0.05 arcsec and do they take into account the
 relative proper motion between the two objects?

• N/A

If you have preferences which OBs should be executed first for objects
 at similar RA, did you make use of the User Priority field in the OBs?

• YES