README web version of /home/usg/OPS/MTS/readme_xml/readme_82027802

Principal Investigator Email Address

```
paolo.saracco@brera.inaf.it
```

Estimated Total Execution Time (hours, including overheads)

```
10
```

General Description

Program 082.A-0278(C)
This run consists in MXU spectroscopic observations of faint galaxies
(R>24.5, Vega). In this mask (S2F1_357) are placed 15 slits.
Observations will be done with the Gris_600z and the filter OG590.
The slit width is 1 arcsec, the length is 16 arcsec.
This run is composed of 10 OBs (S2F1_357-0,...,S2F1_357-9) of 1 hours 
each summing up to about 10 hours including overheads.

Each OB is composed of three templates: the acquisition template
FORS2_mxu_acq  and the two science templates FORS2_mxu_obs_slit and
FORS2_mxu_obs_off.
The template FORS2_mxu_obs_off executes 1 exposure of 660 sec at four
offset positions ABAB along the slit. Position A is 3 arcsec up with 
respect to the center of the slit, position B is 3 arcsec down with 
respect to the center of the slit.

Waiver Requests

```
No Waiver Request was submitted
```

Critical Observing Condition Constraints

```
Seeing <0.9 arcsec
```

Time-Critical Aspects

```
None
```

Special Execution Requirements

---(Empty)---

Special Calibration Information

```
Standard Calibration
```

ToO Information

---(Empty)---

ToO Activators List

---(Empty)---

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

---(Empty)---

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

---(Empty)---

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

```
N/A
```

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

```
N/A
```

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

If you have prepared your finding charts with tools other than FIMS, do they comply with the specifications on the FORS1 Phase 2 web page ?

```
N/A
```

Last creation of page: Tue Oct 6 15:40:26 2009
If you have comments, please contact usd-help@eso.org