README web version of /home/usg/OPS/MTS/readme_xml/readme_82027800
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
Program 082.A-0278(A)
This run is the pre-imaging in the R-filter of three fields targeted for
MXU spectroscopic observations containing a sample of early-type galaxies
at z~1.4.
These galaxies have magnitudes R~24.5 (Vega), thus an exposure time of about
30 minutes is required on each field to detect them at a S/N~8.
To reach this magnitude with this exposure time, observations should be carried
out under Clear sky transparency and no more than 10 day before the new moon
if possible. This run includes 3 OBs, one for each field.
Each OB is composed by two templates: the acquisition template
FORS2_img_acq and the science template FORS2_img_obs_crsplit.
The acquisition template rotates each field by the proper angle in order
to fit the galaxies within the effective area of FORS2 in MXU mode.
We calculated the PA positive from North to Est and, according to the
definition of "Rotator on sky=-PA", we specified a negative value.
The science template executes three exposures (Number of exposure per setup)
of about 10-11 minutes each, summing up to 30 minutes on each field.
No Tel. offsets between the three exposures are applied.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS1 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:26 2009
If you have comments, please contact usd-help@eso.org