README web version of /home/usg/OPS/MTS/readme_xml/readme_82016200
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
We want to obtain deep FORS2 spectroscopy of faint LBGs in the GOODS-South
field. We use
two pointings with two grisms each (1200R and 1028z). We use 45 obs:
sciMXU_0162_1200R_P1_01-11 (Pointing 1 and Grism 1200R)
sciMXU_0162_1028z_P1_12-22 (Pointing 1 and Grism 1028z)
sciMXU_0162_1200R_P2_23-33 (Pointing 2 and Grism 1200R)
sciMXU_0162_1028z_P2_34-45 (Pointing 2 and Grism 1028z)
The two setups for the same pointing are very similiar (e.g. the same rotation and
pointing). However, some slits are different and of course the grism is different.
We need the following conditions: seeing 1'', dark time, and clear sky. We need
no special calibration.
We used FISM and the Vanzella et al. 2008 catalog (which is based on the ACS GOODS
images) to generate the masks. The catalog of the reference stars was generated
from the corresponding ACS GOODS catalog (z mag between 18 and 20 and pointlike
sources). On each mask three we put a slit on three bright stars our reference
star catalog. These three slits should be used when looking at the slitthrough
image to check if the mask is well placed.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS1 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:26 2009
If you have comments, please contact usd-help@eso.org