README web version of /home/usg/OPS/MTS/readme_xml/readme_81094700
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
Information on targets:
OB name target comments
----------------------------------------------------------------------
sciG1434 z=0.180 K<15.5 Pa_alpha line expected near 2.2132um
sciG1434short z=0.180 K<15.5 Pa_alpha line expected near 2.2132um
The main characteristics of the observations are as follows.
- The OBs are prioritized 1,2 according to the integration time.
- The DITs for our exposures of the science target are 600s.
- The spectral feature we wish to observe is Pa_alpha in emission;
the expected wavelength is given in the table. There are no previous
spectroscopic observations in the near-IR, so the source's exact Pa_alpha flux
and morphology is not known. Its size, however, is not expected
to be very different from its optical continuum size. We estimated
the Pa_alpha flux based on observed H_alpha from SDSS, together with
an estimate of the extinction from the Balmer decrement also from SDSS.
The Pa_alpha surface brightness is thus estimated to be ~4.7e-15
erg/s/cm^2/arcsec^2.
- We are using the 250mas scale, with field of view (FOV) of 8"x8".
We use separate sky exposures given that the sources may be rather large
relative to the FOV.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
Did you indicate the magnitude of the brightest object in the field in
each SINFONI OB?
If you are using the AO: Did you indicate for every OB the magnitude
of the guide star, and its distance to the target (if any)?
If you submitted OBs for standard stars, did you use the provided StandardStar
templates?
If you are using a specific offset pattern or position angle: did you
check carefully the definition in the manual?
Did you make really sure that none of your OBs ever saturates the detector?
If you are using the AO: did you enter the correct Strehl Ratio (on-axis,
K-band) AND the seeing value in the constraint set?
Last creation of page: Tue Oct 6 15:40:25 2009
If you have comments, please contact usd-help@eso.org