README web version of /home/usg/OPS/MTS/readme_xml/readme_81019000

Principal Investigator Email Address

```
Ansgar.Reiners@phys.uni-goettingen.de
```

Estimated Total Execution Time (hours, including overheads)

```
14
```

General Description

This is the second part of a UVES high-resolution survey in a volume-limited
 sample of late M dwarfs.
All targets are of spectral type M7-M9.5 and within 20pc. Proper motions (PM) can
 be very large and is given when available. For some objects, it is not known, but
 the objects are relatively bright in I and should be easy to find using the finding
 charts. 

One observation is planned per object, exposure times are split into three exposures
 when the integration time is longer than 15 minutes. Observations can be carried
 out any time.

Waiver Requests

Two waivers accepted under
WaiverID:  081.D-0190A.01

1. Special setting with a red central wavelength of 830nm.
2. Some OBs longer than one hour execution time.

Critical Observing Condition Constraints

```
no critical constraints apply
```

Time-Critical Aspects

```
no time critical aspects apply
```

Special Execution Requirements

```
no special requirements
```

Special Calibration Information

```
no special calibration
```

ToO Information

---(Empty)---

ToO Activators List

---(Empty)---

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

---(Empty)---

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

---(Empty)---

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you specified the S/N ratio at given wavelength in the User Comments field of each OB?

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

```
N/A
```

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

```
N/A
```

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

If you need secondary guiding, are there suitable objects within 30 arcsec from your target ?

```
N/A
```

Last creation of page: Tue Oct 6 15:40:23 2009
If you have comments, please contact usd-help@eso.org