README web version of /home/usg/OPS/MTS/readme_xml/readme_81006000

Principal Investigator Email Address

```
dannerb@mpia-hd.mpg.de
```

Estimated Total Execution Time (hours, including overheads)

```
07:59:52
```

General Description

This is a simple line detection experiment of two faint high-z QSOs by
 using the LSS mode of FORS2. We note that the CFHT I-band images used for making
 the finding charts are deep. 

We placed both our target and a reference star (I(AB)~18.5-20.5) on our 1 arcsecond
 wide slit by applying a rotation angle. In the image through the slit both the reference
 object and the target should be easily seen. The coordinates in de OBS are the ones
 of our target(s).
 
Field of QSO49208
----------------- 
Target: I(AB)=23.3
RefStar1: I(AB)=18.5
Distance between target and RefStar1: 47.03 arcsec (distRA=45.93",distDEC=10.08")
PA:-77.62 degree
rotAngle=77.62 degree

Field of QSO192934
------------------
Target: I(AB)=24.0
RefStar2: I(AB)=20.5
Distance between target and RefStar2: 61.38 arcsec (distRA=26.70,distDEC=55.23)
PA:-25.88 degree
rotAngle=25.88 degree

Waiver Requests

```
No Waiver Request was submitted
```

Critical Observing Condition Constraints

```
None.
```

Time-Critical Aspects

```
None.
```

Special Execution Requirements

```
None.
```

Special Calibration Information

```
None.
```

ToO Information

---(Empty)---

ToO Activators List

---(Empty)---

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

```
None.
```

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

Imaging from Survey CFHTLS taken with MegaPrime/MegaCam

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

```
N/A
```

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

```
N/A
```

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

If you have prepared your finding charts with tools other than FIMS, do they comply with the specifications on the FORS1 Phase 2 web page ?

```
N/A
```

Last creation of page: Tue Oct 6 15:40:23 2009
If you have comments, please contact usd-help@eso.org