README web version of /home/usg/OPS/MTS/readme_xml/readme_81002600
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
This is a ToO program to measure the linear polarization of hypernovae
associated to GRBs. Given that hypernovae associated to GRBs might show a wide
range of apparante magnitudes, we have decided to submit 13 OBs with different exposure
times, binning and frames per OB.
Six of the OBs have a binning of 1x1, instead of the standard 2x2 binning. These
6 new OBs are based on the expericience we had in P80
observing SN2008D with our ToO program 080.D-0008(A) (the same as 081.D-0026(A)
but in P80) where the OBs were not efficient to observe bright targets. The six
1x1 binned OBs have been checked in after the a granted waiver request, where we
explained that the 2x2 binned OBs saturate bright hypernovae as SN2008D observed
in P80.
This set of 2x2 and 1x1 binned OBs will provide us a wide operational range at the
time of activation.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Javier Gorosabel, jgu@iaa.es Antonio de Ugarte, deugarte@iaa.es Martin
Jelinek, mates@iaa.es Petr Kubanek, petr@kubanek.net Alvaro LLorente, Alvaro.Llorente@esa.int
Alberto Castro-Tirado, ajct@iaa.es Jose Maria Castro Ceron, josemari@alumni.nd.edu
Sergei Guziy, gss@iaa.es
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS1 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:23 2009
If you have comments, please contact usd-help@eso.org