README web version of /home/usg/OPS/MTS/readme_xml/readme_80504700

Principal Investigator Email Address

```
jean-gabriel.cuby@oamp.fr
```

Estimated Total Execution Time (hours, including overheads)

```
10.0 hrs
```

General Description

This DDT is to do MR spectroscopy at 1.06 micron with ISAAC of two faint
 objects, named with their Id, 16793 and 2616. There are 5 x 1hr OB for each object,
 10 hrs in total.

The first priority is 16793 for which the 5 OBs should be completed before starting
 2616, the User priority has been set accordingly.

The DIT for spectroscopy is very long so as to have only 2 exposures per OB and
 be background limited.

The acquisition for 16793 is on a ~ J = 15 reference star which is in the slit together
 with the object
The acquisition for 2616 is on a ~ J = 17.5 star followed by a telescope offset
 to bring the target in the slit. There is a J ~ 20 star which will fall as well
 in the slit which could possibly be checked at the end of the acquisition template.

The Moon can be a problem for these observations if too close to the Moon. Please
 try to avoid FLI=1 and less than 60 degrees from the Moon, but these constraints
 can be violated if this can help to get the observations done.

Waiver Requests

```
No Waiver Request was submitted
```

Critical Observing Condition Constraints

```
None
```

Time-Critical Aspects

```
None
```

Special Execution Requirements

---(Empty)---

Special Calibration Information

---(Empty)---

ToO Information

---(Empty)---

ToO Activators List

---(Empty)---

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

---(Empty)---

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

---(Empty)---

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

```
N/A
```

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

If you submitted OBs for standard stars, did you use the provided StandardStar templates ?

```
N/A
```

If you are using a specific offset pattern or position angle, did you check carefully the definition in the manual ?

```
N/A
```

If you are doing spectroscopy, did you draw the slit on the Finding Charts ?

Did you enter the magnitude of the brightest star in the field-of-view in the 'Instrument Comments' field of each OB ?

If you use the MoveToPixel acquisition, have you given clear instructions on the FC and in the OB comment section as to how the field should be centered ?

```
N/A
```

Last creation of page: Tue Oct 6 15:40:22 2009
If you have comments, please contact usd-help@eso.org