README web version of /home/usg/OPS/MTS/readme_xml/readme_80501304
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
This is a monitoring program we have carried since July. The observations
have been obtained at four weeks interval, with the last one taken at the end of
February. Therefore, this fifth set of OBs in FORS (one for FORS1, one for FORS2)
should be observed during the last week of March.
The object is slightly elongated, please put the slit at the center.
Some of the brightest emission lines might be saturated, this is ok since we are
interested in the continuum.
This are the fifth pair of OBs (out of a total of 5 pairs) for this period. Monitoring
will continue during period 81. Since the object might be evolving, we would like
to assess our setup before submitting the OB for April. Therefore, we request access
to the data as soon as it is obtained (In previous observations, data have been
uploaded to the ESO ftp, and then given instructions on how to retrieve it)
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Since this is a monitoring program, please execute the observations during
the last week of March.
Runs 280.D-5013(E) and 280.D-5013(J) are the fifth pair of observations for this
period, they should ideally be observed less than a week apart.
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS1 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:22 2009
If you have comments, please contact usd-help@eso.org