README web version of /home/usg/OPS/MTS/readme_xml/readme_80081100

Principal Investigator Email Address

```
mpetr@eso.org
```

Estimated Total Execution Time (hours, including overheads)

```
33h
```

General Description

Simple NACO Ks-band imaging programme. 

In general, all OBs can be executed under bad seeing conditions, but please preferentially
 execute OBs
prefixed with FAINT_xxx when the conditions are good (<=1"). OBs with prefix
 BRIGHT_xxx can be
executed also under worse conditions. 
 
The WFS star is always identical with the target, and always identical with the
 object in the center
of the FC.

Please adjust DIT and NDIT if needed, in order to keep target peak counts below
 the detector linearity
limit.

There are some targets with lower priority (indicated as priority 2 in the OBs).

Targets stars have 7.4 mag < K < 11.5mag (and no brighter stars are within
 the FOVs). The exception is
object V380_028, with K=5.9, for which the neutral density filter + Ks is used.

Waiver Requests

```
No Waiver Request was submitted
```

Critical Observing Condition Constraints

```
None
```

Time-Critical Aspects

```
None
```

Special Execution Requirements

OBs named BRIGHTxxxx should preferentially be executed when the seeing
 is indeed not very good, 
since the WFS stars are bright and a decent SR can be achieved even under bad conditions.

OBs named FAINTxxx would benefit from good seeing, therefore these OBs (if possible)
 should
be executed if seeing is 1" or better.

In general, all OBs can be executed under conditions as specified in the constraints
 (1.4"/THIN).

Special Calibration Information

```
None
```

ToO Information

```
This is not a TOO
```

ToO Activators List

```
N/A
```

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

```
N/A
```

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

---(Empty)---

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

```
N/A
```

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

If you have PSF reference star OBs, do the names of those OBs begin with PSF_ ?

```
N/A
```

If there are Finding Charts attached to your OBs, is the field-of-view of at least one of these charts 2' x 2' (with clearly labelled field orientation) ?

Have you clearly marked and labelled your wavefront reference objects R1, R2, R3, ... (as specified in the NAOS Preparation Software) on your Finding Charts ?

Have you specified the magnitude of the brightest object in the field-of-view for each OB ?

Are there objects in any of your fields (including standard stars) which are brighter than the limits specified in the User Manual and on NACO web Pages ?

If the previous answer is yes, have you given a list of OBs and a justification for the brightness limit violation in the general description field ?

```
N/A
```

Last creation of page: Tue Oct 6 15:40:22 2009
If you have comments, please contact usd-help@eso.org