README web version of /home/usg/OPS/MTS/readme_xml/readme_80064201

Principal Investigator Email Address

```
cwillott@uottawa.ca
```

Estimated Total Execution Time (hours, including overheads)

```
09:59:30.000
```

General Description

This run comprises long slit spectroscopy of a z>6 quasar.
Observations are made with two instrumental setups: the GRIS-600z and
GRIS-600RI gratings. Each grating setting has 5 OBs which each contain
an acquisition, a through slit image and 2 integrations of time 1350s.

The target given in the target component is a star (mag i=22.5) located 8.0"
away from the QSO (mag i=24.8). The star is acquired in the slit with
rotator set so that QSO is also centred in the slit. Acquisition is performed with
 the I filter because the star is faint and the z filter is less sensitive.

Waiver Requests

```
No Waiver Request was submitted
```

Critical Observing Condition Constraints

```
As given in constraint set.
```

Time-Critical Aspects

```
None
```

Special Execution Requirements

---(Empty)---

Special Calibration Information

---(Empty)---

ToO Information

---(Empty)---

ToO Activators List

---(Empty)---

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

---(Empty)---

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

---(Empty)---

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

```
N/A
```

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

If you have prepared your finding charts with tools other than FIMS, do they comply with the specifications on the FORS1 Phase 2 web page ?

Last creation of page: Tue Oct 6 15:40:22 2009
If you have comments, please contact usd-help@eso.org