README web version of /home/usg/OPS/MTS/readme_xml/readme_79053600
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
The purpose of these observations is to acquire midIR continuum images
of 3 PNe: NGC6369, NGC3242 and NGC7009.
NGC7009, NGC6369, and NGC3242 are all very extended for VISIR. Six OBs
will attempt scanning accross the nebulae with generic offsets. The
offset patterns consist of 3 positions, each corresponding to 3 ABBA
nod/chop sequences in the parallel direction.
All of the other OBs are designed to chop on the nebula. I will
reconstruct sky images using MEM modelling. The chopping pattern is a
square, centred on the central star.
I used 0 jitter box because I am already sampling the array with
different chop throws (required to recover chopped-out spatial scales
in the MEM models).
Because these midIR images will be compared against the radio
continuum, I need very accurate astrometry. Please make sure to store
the information on where the acquisition star is located relative to
the science image.
The acquisition stars are the PN central stars, which are 2MASS stars
in all cases. The central star K-band magnitudes are: K=11.67 for
NGC7009, K=11.35 for NGC6369, K=11.748 for NGC3242.
CALIBRATION REQUIREMENTS:
I need careful PSF monitoring. I provided 4 special purpose PSF STD
OBs. These are:
CAL_NGC 3242 PAH2 PSF STD must immediately precede NGC3242 PAH2-0
CAL_NGC 6369 PAH2 PSF STD must immediately follow any of the OBs called
NGC 6369 PAH2-i, for example NGC 6369 PAH2-1.
CAL_NGC 6369 PAH2 PSF STD-0 must immediately follow either NGC 6369 PAH2ref-scan
or NGC 6369 PAH2ref-scan-0
CAL_NGC 7009 PAH2 PSF STD must immediately precede NGC 7009 PAH2-0
I hope it will be possible to schedule on the same night OBs grouped
in the following groups, ordered by execution time and priority:
group1 CAL_NGC 3242 PAH2 PSF STD 00:03:00.000 00:12:30.000
group1 276571 NGC 3242 PAH2-0 00:25:00.000 00:47:00.000
group1 276572 NGC 3242 PAH2-1 00:25:00.000 00:47:00.000
group1 276573 NGC 3242 PAH2-2 00:25:00.000 00:47:00.000
group2 276569 NGC 3242 PAH2-scan 00:32:30.000 00:58:15.000
group2 276574 NGC 3242 PAH2ref-scan 00:32:30.000 00:58:15.000
group3 264163 NGC 6369 PAH2 00:25:00.000 00:47:00.000
group3 264165 NGC 6369 PAH2-0 00:25:00.000 00:47:00.000
group3 264166 NGC 6369 PAH2-1 00:25:00.000 00:47:00.000
group3 264167 NGC 6369 PAH2-2 00:25:00.000 00:47:00.000
group3 CAL_NGC 6369 PAH2 PSF STD 00:03:00.000 00:12:30.000
group4 276714 NGC 6369 PAH2-scan 00:30:00.000 00:54:30.000
group4 NGC 6369 PAH2-scan-0 00:30:00.000 00:54:30.000
group5 276715 NGC 6369 PAH2ref-scan 00:28:45.000 00:52:38.000
group5 NGC 6369 PAH2ref-scan-0 00:28:45.000 00:52:38.000
group5 CAL_NGC 6369 PAH2ref PSF STD-0 00:03:00.000 00:12:30.000
group6 CAL_NGC 7009 PAH2 PSF STD 00:03:00.000 00:12:30.000
group6 264174 NGC 7009 PAH2-0 00:25:00.000 00:47:00.000
group6 264176 NGC 7009 PAH2-1 00:25:00.000 00:47:00.000
group6 264177 NGC 7009 PAH2-2 00:25:00.000 00:47:00.000
group7 276716 NGC 7009 PAH2-scan 00:30:00.000 00:54:30.000
group7 276695 NGC 7009 PAH2ref-scan 00:30:00.000 00:54:30.000
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If the provided finding chart is at a different wavelength than the observations,
did you clearly describe in the README file how to identify the target?
Did you specify a guide star brighter than V=12mag within a field of
r=5arcmin around the science target?
Last creation of page: Tue Oct 6 15:40:19 2009
If you have comments, please contact usd-help@eso.org