README web version of /home/usg/OPS/MTS/readme_xml/readme_78029408
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
MIDI/AT observations of three oxygen-rich Mira variables at three different
epochs. At each
epoch, visibilities should be obtained at three position angles using three different
baselines. Such a homogeneous data set will provide us with a unique opportunity
to study
the physical properties of the outer atmosphere and the dust formation zone and
their
temporal variations.
For two calibrators, sirius and procyon, no finding charts are attached, because
they are
so bright that 5'x5' areas around them are completely saturated, making finding
charts
useless. In either case, the calibrator is the brightest object in the surrounding
5'x5'
field.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
Name : HD 82668
Coordinates: 09:31:13.319 -57:02:03.757
V magnitude: 3.18
N magnitude: -1.0
Sp. type : K5III
UD diameter: 7.13 +/- 0.079 mas
Source of UD diameter: Cohen et al. 1999, AJ, 117, 1864
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
Did you indicate for each science star OB the corresponding calibrator
star OB (and vice versa) in the 'Instrument Comments' field ?
Did you check that your chosen calibrator is bright enough for the instrument
mode used ?
If you use calibrator stars which are not in the CalVin database, did
you specify their characteristics in the README file and in the OBs ?
Last creation of page: Tue Oct 6 15:40:15 2009
If you have comments, please contact usd-help@eso.org