README web version of /home/usg/OPS/MTS/readme_xml/readme_78004900
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
This program is a deep multi-filter survey of the star forming region
ChaI.
Run A, carried out with VIMOS, is the optical part of the survey using the
filters I and z. (The near-infrared part is carried out with SOFI at NTT in
run B.) We intend to observe four fields around the main cores of the
ChaI region. For each field, we have created one OB, which contains all
observations for this field, i.e. a sequence of 10 long exposures in I and z
plus short exposures in both filters. The long exposures are carried out in
a small-scale dither pattern with 10" stepsize.
For each field and thus OB, we provide two finding charts:
a) Generated with the GuideCam software and based on optical images. Shows the
position of the guide probe and the guide star as well as the field of view.
b) A 5' 2MASS J-band image of the central part of the field.
Please note: The fields contain dark clouds. Therefore, optical images look
very different from near-infrared images. In I- and z-band, the images will be
more comparable to the 2MASS J-band.
Waiver Requests
The waiver 078.C-0049A.01.WAV has been submitted on Jul 25 and granted
on July 26. According
to the waiver request, we are allowed to define OBs which have need up to 1.5 hours
for
execution. This allows us to carry out all observations for a particular field in
the same
OB, and thus in the same observing night, which avoids calibration issues in the
photometry.
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
Did you specify suitable guide stars for all your OBs using Guidecam
?
Did you check that the chosen guide stars are suitable for all the offset
positions and that they do not produce unacceptable vignetting of the field of view
?
Last creation of page: Tue Oct 6 15:40:15 2009
If you have comments, please contact usd-help@eso.org