README web version of /home/usg/OPS/MTS/readme_xml/readme_77080600
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
The target is a large nearby elliptical galaxy, which fills the IFU field
of view (and much more -- the effective radius is 12.5 arcsec, cf 13x13 arcsec fov).
Eight OBs each containing one long (31min) science exposure plus a short (2min)
offset sky. The skies have been checked to exclude any bright objects; they are
~10xReff from the field centre, i.e. about 2 arcmin.
Aquisition should be straightforward -- just put the peak of the galaxy flux at
the centre of the IFU.
Each science exposure is offset slightly from the reference position (in a centre-less
3x3 grid with 5.5 lenslet offsets between neighbouring positions) to dilute bad
fibres and recover spatial undersampling if seeing very good.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
Did you specify suitable guide stars for all your OBs using Guidecam
?
Did you check that the chosen guide stars are suitable for all the offset
positions and that they do not produce unacceptable vignetting of the field of view
?
Last creation of page: Tue Oct 6 15:40:14 2009
If you have comments, please contact usd-help@eso.org