README web version of /home/usg/OPS/MTS/readme_xml/readme_77067900

Principal Investigator Email Address

```
a.zijlstra@manchester.ac.uk
```

Estimated Total Execution Time (hours, including overheads)

```
15
```

General Description

FLAMES ARGUS observations of compact PN. The PN will be
of comparable size to the ARGUS field of view. Several
gratin setting are used, to measure line profiles of individual
lines and to measure velocity shifts along the nebulae.
Two low resolution settings are used to get intensities
for fainter lines, without velocity information.

Astrometry has been obtained from one WFI image, 2 EMMI images
astrometrically calibrated using the USNO,
and in one case from the dss. positions for the four fiducial stars
are measured on the images. Three of the fields are crowded.
The chosen stars are clearly visible on the H-apha EMMI images but less so 
on the dss.

Waiver Requests

```
No Waiver Request was submitted
```

Critical Observing Condition Constraints

Thin cirrus acceptable. seeing <= 1 arcsec preferred
but will accept slightly worse

Time-Critical Aspects

```
none
```

Special Execution Requirements

```
none
```

Special Calibration Information

```
standard calibrations suffice
```

ToO Information

```
n/a
```

ToO Activators List

```
n/a
```

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

```
n/a
```

Source(s) of Pre-imaging

```
WFI:DSS
```

Pre-imaging sources not listed above

```
EMMI
```

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

```
N/A
```

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

```
N/A
```

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

```
N/A
```

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

Did you specify in your OBs the hour angle range for which your Target Setup files are valid ?

Did you specify in your OBs the magnitudes of FACBs and Guide Star for all your fields ?

Are the FACBs and Guide Star in the brightness ranges specified in the FLAMES manual ?

Did you enter the expected signal to noise in your OBs ?

Last creation of page: Tue Oct 6 15:40:14 2009
If you have comments, please contact usd-help@eso.org