README web version of /home/usg/OPS/MTS/readme_xml/readme_77049100
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
Observations consist of the time-resolved spectroscopy of the rapidly
pulsating A star. Observations are scheduled simultaneously with photometry by the
MOST satellite and should be carried out between July 2 and August 2, 2006. Data
are to be obtained during 4 non-consecutive nights, for 4 hours each night. There
are 4 observing blocks. Each consists of 211 science exposures and one attached
wavelength calibration.
Waiver Requests
The total length of each OB is 4 hours (waiver request submitted 16-01-2006,
ID: 077.D-0491A.01, approved 23-01-2006).
To maximize the duty cycle we are using ultrafast readout mode "625kHz,4ports,low
gain" (waiver request submitted 16-01-2006, ID: 077.D-0491A.01, approved 23-01-2006).
Critical Observing Condition Constraints
We accept the risk of degrading observing conditions (seeing, sky transparency)
after first hour of OB execution. However, OB execution should be started SUFFICIENTLY
EARLY during the night so that last scientific exposures are obtained when the star
is at airmass<2.0.
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you need secondary guiding, are there suitable objects within 30 arcsec
from your target ?
Last creation of page: Tue Oct 6 15:40:13 2009
If you have comments, please contact usd-help@eso.org