README web version of /home/usg/OPS/MTS/readme_xml/readme_77029101
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
J-band spectroscopy of YSOs in a young cluster. The slit positions
have been chosen to cover the most important objects; nevertheless we
aim to have as many objects on the slit as possible.
We are aware of the fact that we did not ask for special
calibration. Nevertheless we would be extremely happy if the telluric
standard stars would be early main sequence stars, and if they would
be observed at similar airmasses.
Comments on revision:
I used the brightenss limits of 17-18m for acquisition in JHK and the ETC
to compute brightness limits in the SZ-band and the NB_1.06 filter. (e.g.
SZ: 15.5-16.5 and NB_1.06: 14.5-15.5)
Unfortunately that computation was not possible for the filter combination
NB_1.06+NB_1.08 because that is not an option in the ETC. Therefore I had
to estimate brightenss limits of 13-14.
Seven OBs make use of the NB_1.06+NB_1.08 filter combination. I changed
only 5 of them to offset acquisition because the reference targets in the
other two OBs should be bright enough (~13.8mag). If that is still to
faint I will of course change these OBs too.
Latest changes:
I have modified the critical OBs according to the recomendation of the
observer i.e. Js+NB_1.08 and DIT=5sec.
For any question concerning this program please contact
vhoff@astro.rub.de
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you submitted OBs for standard stars, did you use the provided StandardStar
templates ?
If you are using a specific offset pattern or position angle, did you
check carefully the definition in the manual ?
If you are doing spectroscopy, did you draw the slit on the Finding Charts
?
Did you enter the magnitude of the brightest star in the field-of-view
in the 'Instrument Comments' field of each OB ?
If you use the MoveToPixel acquisition, have you given clear instructions
on the FC and in the OB comment section as to how the field should be centered ?
Last creation of page: Tue Oct 6 15:40:12 2009
If you have comments, please contact usd-help@eso.org