README web version of /home/usg/OPS/MTS/readme_xml/readme_77028700
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
Optical low-resolution spectroscopy (360--600nm) of 3 silicate carbon
stars to investigate a possible signature of a low-luminosity companion. Since
our targets are very red (i.e., quite bright in the V band, but very faint in the
U band), we take two exposures for each object, one short exposure optimzed for
the B- and V-band ranges with GRISM_300V (slit width 0.5") and a long exposure optimzed
for the shorter wavelength range (< ~400nm) with GRISM_150I (slit width 1.0").
In this long exposure, the V-band range will be saturated. However, the exposure
time of each frame and the number of frames were set to avoid CCD bleeding and gain
S/N ratios at shorter
wavelenths (< ~400nm) as much as possible. For two objects (IRAS18006-3213 and
IRAS11048-6046), a total exposure time of this long exposure is significantly longer
than 1 hour, so it is split into 3 or 4 OBs that are shorter than 1 hour.
Waiver Requests
Critical Observing Condition Constraints
All OBs should be carried out in CLEAR or better conditions with seeing
<= 1", airmass <= 1.7. The OBs using GRISM_150I should be carried out on
gray nights (FLI = 0.4, Moon angular distance = 120 deg). The OBs using GRISM_300V
for IRAS17291-3401 and IRAS18006-3213 can be carried out
under brighter lunar phases (FLI = 1.0, Moon angular distance = 90 deg). However,
the OB using GRISM_300V for IRAS11048-6046 should be carried out under FLI = 0.7
and Moon angular distance
= 120 deg.
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS1 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:12 2009
If you have comments, please contact usd-help@eso.org