README web version of /home/usg/OPS/MTS/readme_xml/readme_76503002
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
This project aims at performing polarimetric
measurements in V light of the potentially hazardous asteroid 99942
Apophis during the most favorable observing conditions in Feb-Mar 2006.
We plan to measure the degree of polarization of the light reflected by the
asteroid at three different phase angles (Run A, B, and C).
We do this using the MOV_99942_IPOL OB.
Moreover we obatin measurments of the Vband magnitude of the object, by means
of the MOV_99942_V1 and MOV_99942_V2 OBs. Since we execute MOV_99942_V1 before
and MOV_99942_V2 after MOV_99942_IPOL, we can correct polarimetric measurments
for possible ligthcurve effects.
We will use the phase-polarization curve obtained from the prosed FORS1 measurements
to derive a reliable albedo which, when combined with the apparent magnitude
and known distance of the object, will lead immediately to a determination
of the size.
Waiver Requests
Critical Observing Condition Constraints
Please put in additional RA and DEC velocities as obatined/computed from
the ephemerides files, in order to track the asteroid.
Please do not observe the target when in front of, or very near by a star of
comparable brightness.
Time-Critical Aspects
Special Execution Requirements
Please, extecute the OBs in the following order.
1. MOV_99942_V1 (V band science Imaginig)
2. MOV_99942_IPOL (V band science Imaginig polarimetry, 4 position of the retarder
plate)
3. MOV_99942_V2 (V band science Imaginig)
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS1 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:11 2009
If you have comments, please contact usd-help@eso.org