README web version of /home/usg/OPS/MTS/readme_xml/readme_76072501
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
NGC 2264 IRS1, also known as Allen's source, is a young, deeply embedded
YSO. In the NIR, a weak jet-like feature was found, extending from IRS1 to the north.
The star shall be observed using the AMBER and MIDI instruments.
For the MIDI observation, we want to use the GRISM, aiming to measure the visibility
with good resolution over the N-band.
No optical counterpart of NGC 2264 IRS1 is known. Therefore it is necessary to
use a nearby source for Coude guiding. A suitable Coude guide star might be OR
Mon (RA=06:41:09.09, DEC=+09:30:09.6, J2000, V=16.2), separated 40'' from the target.
An alternative Coude guide star might be V431 Mon (RA=06:41:08.01, DEC=+09:30:40.8,
V=15.6), which is slightly further away (1.2').
We generated OBs for two calibrator stars to give a backup calibrator in case the
first calibrator cannot be observed successfully. Due to the better matching brightness,
we specify CAL_HD61421 (60 Jy) as our first choice and CAL_HD61935 (8 Jy) as backup
calibrator star.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
Did you indicate for each science star OB the corresponding calibrator
star OB (and vice versa) in the 'Instrument Comments' field ?
If you use calibrator stars which are not in the CalVin database, did
you specify their characteristics in the README file and in the OBs ?
Last creation of page: Tue Oct 6 15:40:11 2009
If you have comments, please contact usd-help@eso.org