README web version of /home/usg/OPS/MTS/readme_xml/readme_75900500
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
The aim of the observations is to detect extra-solar planets with the
transit method. Only one field toward the spiral arms during the ntire run will
be observed in the R filter with exposure times of 720 sec. The Obs blocks are about
about 59 min, containing 4 exposures. The field should be taken with airmass<2.
Thus it will be visible with this constraint from the beginning of the night until
approximately 2 am.
About 2 hours of the entire run are dedicated to different filters-V,B,I-for calibration
purposes. Three images of each filter should be taken on a photometric night with
seeing<1 arcsec, airmass<1.3, and during dark time. The Obs blocks for these
observations contain only one exposure.
Sky Flat fields should be taken if possible each dawn/sunset in the R filter.
Sky Flat fields for V,B,I are also requested once (3 times each filter).
Dome Flats for all filters, V,B,R,I are requested once (3 times for each filter).
Darks and Biases should also be taken once (10 times each).
Waiver Requests
Critical Observing Condition Constraints
The field should be taken with airmass<2. Thus it will be visible with
this constraint from the beginning of the night until approximately 2 am.
About 2 hours of the entire run are dedicated to different filters-V,B,I-for calibration
purposes. Three images of each of these filters should be taken on a photometric
night with seeing<1 arcsec, airmass<1.3, and during dark time. The Obs blocks
for these observations contain only one exposure.
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
Did you set 'New Preset' flag in all acquisition templates to 'True'?
Have all your submitted OBs the same filter for the acquisition template
and for the first science template?
Did you combine calibration templates with science templates for any
OB?
Did you combine imaging and spectroscopic templates for any OB?
Did you submit any Focus template?
Last creation of page: Tue Oct 6 15:40:09 2009
If you have comments, please contact usd-help@eso.org