README web version of /home/usg/OPS/MTS/readme_xml/readme_75900400

Principal Investigator Email Address

```
meise@mpia.de
```

Estimated Total Execution Time (hours, including overheads)

```
24:55
```

General Description

This is a straight forward imaging program of two WFI fields. We use the
 standard R and V filter
plus eight non-standard filters. No photometric calibration required.

Note: Before observing the R band OBs (seeing < 0.8 arcsec), the instrument focus
 should be checked !

Note: We use the standard aut-dither pattern for the first OB of each filter (labeled
 by the
letter a). Further integrations contained in additional OBs (labeled ..b,..c, ...)
 extend
the dither pattern to up to 10 positions. The observations should be carried out
 along the sequence a,b,c ... !

Waiver Requests

```
No Waiver Request was submitted
```

Critical Observing Condition Constraints

The R-band images should be carried out under the best seeing conditions;
 that is a
telescope seeing of < 0.8 arcsec (as measured on a 300s R-band exposure).

Time-Critical Aspects

```
none
```

Special Execution Requirements

---(Empty)---

Special Calibration Information

We need twilight flatfields for the eight non-standard filters. No 
photometric calibration required.

ToO Information

---(Empty)---

ToO Activators List

---(Empty)---

Is this a Pre-imaging run ?

```
false
```

Pre-imaging Requirements

```
none
```

Source(s) of Pre-imaging

---(Empty)---

Pre-imaging sources not listed above

---(Empty)---

Do all your OBs comply with the instrument-specific requirements listed on the instrument-specific Phase 2 web page ?

If this is a pre-imaging run, did you select PRE-IMAGING for the Observing Category for each Observing Template ?

```
N/A
```

Do all your finding charts comply with both the general and instrument-specific Phase 2 Web Pages ?

If you submitted OBs for standard stars, did you specify the magnitude and spectral type of all standard stars in the OBs ?

```
N/A
```

Have you included OBs for any calibrations that you need but which are not part of the Calibration Plan ?

If you are observing Moving Targets, have you attached suitable ephemeris files to your OBs?

```
N/A
```

If you have preferences which OBs should be executed first, did you make use of the User Priority field in the OBs ?

If this is a run that requires coordinated observations with other facilities, did you give proper instructions in the Time-Critical Aspects Section ?

```
N/A
```

Did you set 'New Preset' flag in all acquisition templates to 'True'?

Have all your submitted OBs the same filter for the acquisition template and for the first science template?

Did you combine calibration templates with science templates for any OB?

Did you combine imaging and spectroscopic templates for any OB?

Did you submit any Focus template?

Last creation of page: Tue Oct 6 15:40:09 2009
If you have comments, please contact usd-help@eso.org