README web version of /home/usg/OPS/MTS/readme_xml/readme_75502100
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
This is a TOO/RRM program aimed at observing 4 GRB afterglows with RRM.
The OBs of this FORS2 run (275.D-5021A) consist of 4 identical RRM
sets (RzIVBR imaging). The RRM master imaging OBs place the GRB
position at the center of the master chip, while the other img OBs use
the normal FORS2 center. At the time of the RRM activation we will
send an alert email containing all vital information, including a
DSS-2 finding chart.
We request the night astronomer to try to identify a possible bright
(mag~14-21) new target on the images (within 1-2 arc minutes of the
field center), and if successful, to start this spectroscopy TOO OB
from the A queue: ToO_following_RRM (program ID: 275.D-0521C)
immediately after the RRM OB has finished (~20min).
If the afterglow cannot be identified, normal operations can be
resumed after the RRM OB has finished.
Please make the data available as soon as possible, so members of our
team can immediately inspect the images for an afterglow. A
subsequent RRM or TOO trigger may follow later on.
Waiver Requests
For all runs of 275.D-0521, two Waiver Requests were submitted and approved:
1) to allow for the night astronomer to try and identify the afterglow,
and if successful, to execute the ToO_followingRRM_lss OB from the queue.
2) to allow for the ToO_followingRRM_lss OB to be longer than 1 hour
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS2 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:09 2009
If you have comments, please contact usd-help@eso.org