README web version of /home/usg/OPS/MTS/readme_xml/readme_75082400
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
We plan to collect NB 121, NB 219 data for four fields around the center
of the globular cluster Omega Centauri (NGC5139). We selected the "FixedSkyOffset"
strategy. We don't have particularly requirement about the seeing: we ask for a
seeing better than 1". This cluster is observed with an airmass <1.5 from january
to august, but the best months are april and may. Please note that the finding charts
have been made using low resolution images collected with FORS1 in the I band. A
median image was created with a pixel scale of 0.15"/px. We selected these images
because of the pixel scale similar to that of ISAAC. The green sqare plotted in
each chart is centred on our pointings, and is somewhat larger than the ISAAc fov.
We decided to use two narrow band filters, because there are many bright sources
in our fields, namely, we selected the NB 121 and NB 219. The brightest star presente
in our OBs are:
om_top_let_*: J=9.14, Ks=8.11
om_bottom_right_*: J=9.05, Ks=8.06
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you submitted OBs for standard stars, did you use the provided StandardStar
templates ?
If you are using a specific offset pattern or position angle, did you
check carefully the definition in the manual ?
If you are doing spectroscopy, did you draw the slit on the Finding Charts
?
Did you enter the magnitude of the brightest star in the field-of-view
in each OB ?
If you use the MoveToPixel acquisition, have you given clear instructions
on the FC and in the OB comment section as to how the field should be centered ?
Last creation of page: Tue Oct 6 15:40:08 2009
If you have comments, please contact usd-help@eso.org