README web version of /home/usg/OPS/MTS/readme_xml/readme_75074900
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
The general goal of these VISIR observations is to make a census of the
massive protostellar population wihin 5 molecular cores. We expect to image point
sources at the target positions as well as possibly extended emission around them.
The fluxes should vary between 50 mJy and 5 Jy in the PAH1 band and between 0.5
Jy and 10 Jy in the Q2 band.
There are 5 sources to be observed in 2 bands (PAH1 and Q2).
Three sources are relatively "strong" in mid-IR and should be clearly detected in
the acquisation
observation: these sources are G318.95-0.20, G335.58-0.29, G31.41+0.31. OBs have
prepared for each
band (PAH1 and Q2) for these sources.
Two sources will be faint in the acquisation observation: G30.72-0.08 and G25.83-0.17.
OBs for these sources contain both PAH1 and Q2 blocks.
Charts are provided for each source. They show a large scale mid-IR image of the
region and a close-up NIR iamge of the target 1-2' environment. The target position
is marked with a cross and indified as "target" on the image.
In the case of G318.95-0.20, G335.58-0.29, G31.41+0.31, we expect the mid-IR source
to coincide with the NIR source associated with the target in the close-up image.
Thanks
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If the provided finding chart is at a different wavelength than the observations,
did you clearly describe in the README file how to identify the target?
Did you specify a guide star brighter than V=12mag within a field of
r=5arcmin around the science target?
Last creation of page: Tue Oct 6 15:40:08 2009
If you have comments, please contact usd-help@eso.org