README web version of /home/usg/OPS/MTS/readme_xml/readme_75070603
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
This program consists of z band pre-imaging of 5 fields as part of a large
program for imaging and spectroscopy. Although this imaging is to a scientific standard
it will also be used to design MXU spectroscopy masks for program 175.A-0706(E)
in period P77.
We are aware that you recommend 100sec exposures when observing in the z band however
from previous experience we prefer 120sec exposures. Mario is happy with this as
the observations are being carried out in the darkest conditions.
As this is zband imaging special care has to be taken when observing the photometric
calibration field. Often only the main object in the field has a zband magnitude
(unlike the ones used for other bands, where you have secondary objects in the field)
so care needs to be taken not to saturate this object. Mario is aware of this as
it has happened in the past.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
As this is zband imaging special care has to be taken when observing the
photometric calibration field. Often only the main object in the field has a zband
magnitude (unlike the ones used for other bands, where you have secondary objects
in the field) so care needs to be taken not to saturate this object. Mario is aware
of this as it has happened in the past.
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS2 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:08 2009
If you have comments, please contact usd-help@eso.org