README web version of /home/usg/OPS/MTS/readme_xml/readme_75070600
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
MXU spectroscopy of two fields using 8 masks.
This program consists of mxu spectroscopy of galaxies over 2 fields. One field,
cl1054-1245, has 5 masks, and the other, cl1040-1155, has 3 masks. The total execution
time is less than that recommended as some of the time was transfer to program 175.A-0706(B),
the pre-imaging.
All the primary targets are fainter than I mag of 25. Because of this nearly ALL
THE OBJECTS ON THE MASKS WILL NOT BE VISIBLE at any stage, this is OKAY. I have
included a few bright objects to confirm that the mask is aligned correctly.
If any problems arise please contact Laura Douglas at L.Douglas@bristol.ac.uk or
+44 7779102472
7th June 2005:
After some alignment problems with J1054-1245 i have changed the alignment stars
to the brightest possible in our field. I have also increased the exposure time
for the aquisition image to 20sec.
Waiver Requests
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you have prepared your finding charts with tools other than FIMS,
do they comply with the specifications on the FORS2 Phase 2 web page ?
Last creation of page: Tue Oct 6 15:40:08 2009
If you have comments, please contact usd-help@eso.org