README web version of /home/usg/OPS/MTS/readme_xml/readme_75063600
Principal Investigator Email Address
Estimated Total Execution Time (hours, including overheads)
General Description
ISAAC longslit spectroscopy of the z=5 gravitationally lensed galaxy behind
the cluster RCS0224-002.
We are targetting the OII(3727) emission which has been redshifted to 2.206microns.
This is a 2hr longslit observation with the 1" slit using the standard
ABBA configuration to acheive sky subtraction. We will nod
the object along the slit by 40". Each observation is 500 seconds with
slit PA of 50degrees
To acquire the target we will peak up on a nearby bright object and
apply a telescope offset. The peak up star is K=17.5mag star and
has co-ordinates ra: 02:24:32.977 dec: -00:02:32.51 (J2000).
The offsets to the target from the star are dRA = 8.895" EAST
and dDec = 11.48" North. The brightest object in the frame is K~15.4 and is
marked on the finder.
These observations are designed to check that this galaxy has strong OII
emission. Once we have checked this, we will move to the SINFONI IFU and
observe this galaxy for 15 hours with the IFU. Please execute these observations
first (and let us know so we can grab and reduce the data) before activating/commencing
the SINFONI observations.
any problems, please contact: a.m.swinbank@dur.ac.uk and/or r.g.bower@dur.ac.uk
Waiver Requests
In order to optimise signal-to-noise and to account for restrictions
of the choice of possible DITs that are least affected by the electronic pick-up
we requested that we be allowed to use 3 ABBA cycles of 500seconds.
This makes each MSB time 1h07m.
We requested a waiver to allow this (slightly longer) execution time,
and this was accepted.
(075.B-0636A.01.WAV)
Critical Observing Condition Constraints
Time-Critical Aspects
Special Execution Requirements
Special Calibration Information
ToO Information
ToO Activators List
Is this a Pre-imaging run ?
Pre-imaging Requirements
Source(s) of Pre-imaging
Pre-imaging sources not listed above
Do all your OBs comply with the instrument-specific requirements listed
on the instrument-specific Phase 2 web page ?
If this is a pre-imaging run, did you select PRE-IMAGING for the Observing
Category for each Observing Template ?
Do all your finding charts comply with both the general and instrument-specific
Phase 2 Web Pages ?
If you submitted OBs for standard stars, did you specify the magnitude
and spectral type of all standard stars in the OBs ?
Have you included OBs for any calibrations that you need but which are
not part of the Calibration Plan ?
If you are observing Moving Targets, have you attached suitable ephemeris
files to your OBs?
If you have preferences which OBs should be executed first, did you make
use of the User Priority field in the OBs ?
If this is a run that requires coordinated observations with other facilities,
did you give proper instructions in the Time-Critical Aspects Section ?
If you submitted OBs for standard stars, did you use the provided StandardStar
templates ?
If you are using a specific offset pattern or position angle, did you
check carefully the definition in the manual ?
If you are doing spectroscopy, did you draw the slit on the Finding Charts
?
Did you enter the magnitude of the brightest star in the field-of-view
in each OB ?
If you use the MoveToPixel acquisition, have you given clear instructions
on the FC and in the OB comment section as to how the field should be centered ?
Last creation of page: Tue Oct 6 15:40:08 2009
If you have comments, please contact usd-help@eso.org